Smart-PRO
Electronic Thermostat
Details
The Smart-PRO is an electronic temperature controller for use in freeze protection and temperature maintenance applications, in non-hazardous locations, and is designed specifically tomeet the higher specification requirements required by end users such as water services plant owners, specification engineers in the buildings construction market, industrial plants etc.
The controller offers an accurate PT100 sensor, off-site programming capability, wide temperature setting range, 24 Hrs / 365 days per year fault monitoring, TTL-RS232 Comms port(convertible to most, commonly used, comms protocols) and long-term reliability.
days per year. If a fault is detected in the heater it will alarm alert.
The heating circuit can be programmed to stay switched OFF (default setting) or switched ON permanently.
The Smart-PRO incorporates an innovative soft-start feature that eliminates inrush
currents, thus allowing for increased circuit lengths over a standard controller.
The unit is designed to work easily with SOLCO PYROELEC heating cable termination kits.
The Smart-PRO is provided with 4 x plastic bracket clips that allow the unit to be
mounted on a wall directly or alternatively mounted on a pipe using a bracket supplied by SOLCO PYROELEC.
Rated Voltage:100Vac (min) – 270Vac (max), 50/60 Hz
Max. Load Current: 32A
Temperature Setting Range: -50°C to +499°C
Ambient Temperature: -20 °C to +60 °C
Temperature Sensor Type: 4-wire PT-100
Enclosure Material: ABS Base, Polycarbonate Transparent Lid
Enclosure Dimensions: 170mm x 228mm x 110mm
No. of Terminals (Rated Cross Section): 12 x 2.5 mm², 9 x 4 mm²
Control Method: ON/OFF
Product Image
