Smart-ECO
Electronic Thermostat
Details
The Solco Pyroelec Smart-ECO air/surface sensing thermostat is designed to provide user friendly measurement and control for SOLCO PYROELEC heating cables. It is designed to provide cost effective and accurate ON/OFF control over trace heating circuits and fault monitoring and feedback via a BMS safety relay.
The Solco Pyroelec Smart-ECO air/surface sensing thermostat has a 20 A control relay switching the heating load and a 2 A BMS fault alarm relay.
Air or surface sensing applications between -20 °C to +99 °C in non-hazardous areas.
The Smart-ECO thermostat is supplied with an NTC thermistor type sensor probe. This has a 3m long cable giving freedom to locate the electronics remote from the sensor.
Up to 4 diagnosed alarm types: Sensor short/open circuit error, Load relay error, Voltage error and high/low temperature limits exceeded error.
The unit is designed to work easily with SOLCO PYROELEC heating cable termination kits.
Rated Voltage:100Vac (min) – 270Vac (max), 50/60 Hz
Max. Load Current: 20A
Temperature Setting Range: -20 °C to +99 °C
Ambient Temperature: -20 °C to +60 °C
Temperature Sensor Type: 3m NTC Thermistor, max. exposure temperature 200 °C
Enclosure Material: ABS Base, Polycarbonate Transparent Lid
Enclosure Dimensions: 125mm x 175mm x 75mm
No. of Terminals (Rated Cross Section): 14 x 2.5 mm²
Control Method: ON/OFF
Product Image
