SP-JBL
LARGE JUNCTION BOX
Details
The SP-JBL is a professional quality junction box designed to easily accommodate power and/or heating cable entry and connection. It is supplied complete with an internal assembly of DIN rail-mounted terminals with easy identification of correct wiring orientation. There are enough terminals for 1 x power and 3 x heater circuits. The enclosure is made from tough weatherproof polycarbonate which generally has better environmental (UV) resistance than ABS and uses 4mm² terminals for easy insertion of wiring. There are enough terminals to easily accommodate 3 heater circuits without the need to ‘gang-up’ more than one circuit per terminal. Typical application/use is to connect POWER to or TEE/SPLICE up to 3 heater circuits.
4mm² DIN rail mounted terminal block for easy wiring identification and access.
IP66/67 tough polycarbonate enclosure
Weatherproof
UV resistant
Enclosure
Dimensions:
Width: 125 mm
Height: 125 mm
Depth: 75 mm
Inner depth: 60.5 mm
Outer base depth: 50 mm
Outer cover height: 25 mm
Body material Base: fibreglass reinforced polycarbonate Cover: polycarbonate Gasket: polyurethane
Knockouts: 4 x M16/M25 + 6 x M12/M20
IP rating: 66/67
Impact strength: IK 08
Minimum temperature rating: (°C) -40
Maximum temperature rating: (°C) 80
Short-term temperature range: (°C) -40 to 120
Flammability rating: UL 746C 5 inch flame test
ETIM class: EC000261
Suitable for outdoor set-up: Yes
Wall fastening possible: Yes
Terminals :
Rated voltage: 1,000V
Rated current: 32A
Cross section: 4mm²
Creepage resistance: CTI 600
Operating temperature (°C): -40 to 120
Assembly:
1 in ‘L’, 3 out ‘L1, L2, L3’
1 in ‘N’, 3 out ‘N1, N2, N3’
1 in ‘E’, 3 out ‘E1, E2, E3’
DIN rail-mounted
Materials:
Polyamide PA6.6 UL94, flammability class V-0, self- extinguishing without burning drops
Product Information
- Tough UV resistant polycarbonate enclosure
- IP66/67 rated
- Available as a kit with 1 x M20/M25 Power gland and 3 x M20/M25 heater glands
- DIN rail-mounted terminals
