HSR-D
Self-regulating heating cable for medium to high temperature
process flow control
Details
Solco Pyroelec HSR-D Self-regulating heating cables offer the best performance in the following applications:
Freeze Protection for water pipeline(s), Battery supplied low voltage applications etc.
Temperature Maintenance for fuel feedline(s) in the automotive sector.
Camping Gear.
It will not burn or overheat even when overlapped
It self-regulates thermal performance in response to temperature
It can be cut to any length to suit any installation condition
Independent heat output control along the length
Soft (power) switching (which improves energy savings and efficiency) and gives a longer service life
Easy termination for power connection and splicing
Continuous exposure temperature up to 85℃ (185°F) Power-Off
Temperature Class ( T- rating ) : T6 (85 ℃)
Rated voltage 24 Vdc max. (12 Vdc also available)
Available in 12 and 17 watts/m
Approx. Dimension:
8.0mm x 2.0mm w/o insulation
9.5mm x 3.5mm with insulation
11.2mm x 5.6mm with outer-jacket
Bus Wire – ASTM B355 Class 2 NPC 16 AWG
Outer Jacket (Optional)
CP – FR polyolefin
: Exposure to aqueous inorganic chemicals
CF – Fluoropolymer
: Exposure to organic chemicals or corrosives
Power Output Graph
HSR Self-regulating heating cable complies with the international standards listed below :
IEC 62395-1
– 2013 Electrical resistance trace heating systems for industrial and commercial
applications Part 1
– General and testing requirements
Circuit Breaker Selection
