Aluminium Foil Tape
30 Micron Adhesive Tape
Details
Reference: SP-AFT-45 30-micron adhesive Aluminium Foil Tape
A soft Aluminium Foil tape coated with a long lasting, (ultraviolet) resistant acrylic adhesive on one side, and lined with a release paper to protect the adhesive face. This product has been tested to BS476 part 6 & 7 standards and meets class 1 and class 0 fire regulations.
It is mainly used to coat a plastic pipe before installation of the heating cable to help dissipate heat generated. It is also used to help affix heating cable to a tank or pipe.
Width: 48mm (others available)
Standard Length: 45m (others available)
Total Thickness: 120µm (incl. release liner)
Shear: > 200 hours
Tensile Strength: 95.5N/ 25mm
Elongation: 5%
Peel Adhesion:
20 mins 14.5 N / 25mm
60 mins 14.3 N/ 25mm
24 hours 19.4 N / 25mm
Looptack: 12.0 N
Humidity Shear test: > 4 hours
Application Temperature: -20ºC to +50ºC (The surface must be free from ice or moisture).
Service Temperature: -40º C to + 120º C (Can withstand 140º C for a few minutes).
Moisture Vapour Permeability: Less than 1gm/M2 (m2)/24 hrs @ 38º & 90% RH
STORAGE: Normal room temperature
USES: A highly specified Aluminium Foil Tape for use in any situation where long life, great adhesive strength or ultra violet resistance is required.
APPLICATION: Surfaces to be bonded must be clean, dry and free from dust. If necessary clean surfaces sparingly with a ketone free proprietary solvent, allow to dry prior to tape application.