MSR
Self-regulating heating cable for medium to high temperature
process flow control
Details
Solco Pyroelec MSR Self-regulating heating cables perform the best for the below applications:
Freeze protection for water pipeline.
Temperature maintenance for petrochemical and gas plant
Personal heating appliances
Flexible heating appliance for medical use
Non hazardous locations
It self-regulates thermal performance in response to temperature
It can be cut to any length to suit any installation condition
Independent heat output control along the length
Soft (power) switching (which improves energy savings and efficiency) and gives a longer service life
Easy connection for powering and splicing.
Temperature maintenance up to 80℃ (176°F)(Power-on)
Continuous exposure temperature up to 100℃ (212°F) (Power-off)
Rated Voltage: 100-120 Vac &200 – 277 Vac Available in 16, 24, 30 & 40 watts/m
Heating cable approx. 13.5mm x 5.6mm
Bus Wire – ASTM B355 Class 2 NPC 16 AWG
Outer Jacket (Optional)
Flame retardant polyolefin(CP) : Exposure to aqueous inorganic chemicals
fluoropolymer(CF) : Exposure to organic chemicals or corrosives
Product Image
Power Output Graph
MSR Self-regulating heating cable complies to the below listed internation standards :
IEEE Standard 515 : 2004
– Testing, Design, Intallation, and Maintenance
of Electrical Resistance Heat Tracing
for Industrial Applications
IEC Standard 60079-30-1 : 2007
– Electrical Resistance Trace Heating
Part 30-1 : General and testing requirements
Part 30-2 : Application guide for testing,
installation, and maintenance
Circuit Breaker Selection
Typical Installation
