Components

Components List

PYEX-PTK-M

Cold Applied Power Connection Kit for Heat Tracing Cable System

This kit is certified for ATEX and IECEx for use in hazardous areas.
The silicone molded power tube does not require a heat gun or torch for insulating heating core.

PYEX-ETK-M

Cold Applied End Termination Kit for Heat Tracing Cable System

This connection kit is designed for end terminating all Solco Pyroelec self-regulating heat tracing cables
while maintaining electrical insulation of the heating cable conductors
and core.

PYEX-PTK-S

Heat Shrink Power Connection Kit for Self-Regulating Heating Cables

PTK-S is for power connecting FBL, FBH, FBX and FBZ parallel heating cables to Ex certified enclosure.

PYEX-EP-PG25

M25 Cable Gland

The M25 plastic cable gland is made of fiberglass reinforced nylon for thermal endurance and mechanical
strength. The silicone rubber seal should be selected with care to maintain optimum sealing with the
heating cable to use with. An additional locknut is provided for unthreaded enclosure wall.

PYEX-SS-BRP-16H

Pipe Mounting Bracket (Horizontal)

Support brackets are used to fix equipment such as the Ex enclosure on pipes.
Applicable Ex Enclosure
-16H : PYEX-EP-JB-12, PYEX-EP-JB-16

-26H : PYEX-EP-JB-26

PYEX-SS-BRP-16V

Pipe Mounting Bracket (Vertical)

Support brackets are used to fix equipment such as the Ex enclosure on pipes.
Applicable Ex Enclosure
-16V : PYEX-EP-JB-12, PYEX-EP-JB-16

-26V : PYEX-EP-JB-26

PYEX-SS-BRW-16V

Wall Mounting Bracket

Support brackets are used to fix equipment such as the Ex enclosure on pipe trays or wall.
Applicable Ex Enclosure
-16V : PYEX-EP-JB-12, PYEX-EP-JB-16

-26V : PYEX-EP-JB-26

PYEX-CL-S/P

Warning Labels

P : PET sheet type warning label
S : SUS316L Plate type warning label used for outdoor use.

PYEX-GT

Glass Tape

The attachment tape is used to fix the heating cable or temperature sensor. The glass tape is made of
fiberglass for thermal endurance and mechanical strength.
– Max. Exposure Temp. 130℃, Size 12mm x 30M

PYEX-AT

Aluminium Tape

The attachment tape is used to fix the heating cable or temperature sensor. The high performance tape
is made of aluminum for thermal conductivity and mechanical strength.
– Max. Exposure Temp. 125℃, Size 50mm x 50M

PYEX-SG

Protective Grommet

Silicone grommet that protects the heating cable at sharp edges such as endplates of insulation cladding,
flanges etc. It can be cut-to-length and resists temperatures up to 215 ℃

PYEX-FS

Pipe Straps

Metal straps for pipe mounting of enclosure connection kit.